1. <td id="6tywr"></td>

    2. <table id="6tywr"><strike id="6tywr"></strike></table>

        <acronym id="6tywr"></acronym>

        Manufacturer of Metallurgical Testing Equipmen


        Always working to provide better products for you

        Online Books

        Product Center 

        SYD-RW185 Comprehensive physical properties tester for melts
            發布時間: 2014-09-24 16:32    

        Molten metal and slag are common metallurgical melts in industrial scale. All the physical and chemical reactions are closely related to the physical and chemical properties of molten metal and slag during the process of smelting and casting, which may significantly influence the thermal conductivity, mass transfer and reaction rate of melts during metallurgical process. The indexes of viscosity, surface tension, density, electrical conductivity of melts during smelting and casting can be predicted by specific equipment. 


        The viscosity of melt can be measured during a cooling process or at a constant temperature state while the rotation speed of rotor is also adjustable, which ensures the accuracy and reliability of test results. The data during test is automatically recorded and processed by a computer while print of recorded data and curves is also supported. It can be applied for the determination of comprehensive physical property of blast furnace slag, mold flux, steelmaking slag, etc.

        Main features

        1.The particular viscometer can ensure the reliability and stability of the test process in long-term, which also ensures the consistency and reproducibility of test results;

        2.The crucible temperature is directly measured and applied to represent the temperature of sample, which is accurate and reliable;

        3.The mechanism of probe with a two-dimensional motion mode and the digital control of vertical movement are conducive to the precise control of probe position in melt sample;

        4.The rotational speed of rotor can be precisely adjusted in a wide range;

        5.The level of liquid can be automatically determined during the testing of viscosity, surface tension and density;

        6.The viscosity of melt can be measured during a cooling process or at a constant temperature state.

        7.Silicon molybdenum heating element can provide high testing temperature with long span.

        8.A fully automatic control mode from ambient temperature to high temperature.

        9.The data during test can be automatically recorded, processed and analyzed.

        Technical parameter

        Temperature control:

        Working temperature: 1700 (Max);

        Temperature range: customization supported;

        Temperature precision: ±3 (Max) with resolution of 0.25;

        Viscosity measurement:

        Viscosity range: 0.01 to 30 Pa·s with accuracy of ±1.5%;

        Rotor: 1 to 35 r/min (adjustable), material: molybdenum;

        Graphite crucible: ?45×95, optional zirconia crucible;

        Vertical movement: accuracy of 0.1 mm;

        Horizontal movement: accuracy 0.5 mm;

        Surface tension (optional):

        Tension puller: ?14×20, material: molybdenum;

        Balance sensitivity: 0.001 g;

        Density determination (optional):

        Density hammer: ?10×12, material: molybdenum;

        Balance sensitivity: 0.001 g;

        Electrical conductivity (optional):

        Probe specification: ?2, material: molybdenum;

        Accuracy: ±1.5%;

        Power supply:

        Voltage: AC 380V, three-phase, four or five-wire;

        Rated power: 4.5 kW;

        Volume(L×W×H): 1450×950×1850mm;

        Weight: 120 kg.